Advanced Cutting Structure Designed Tricone Rock Bit For Mining Industry
Click here for catalogueTCI DRILL BIT.pdf
What is Tricone Rock Bit ?
Tricone Rock Bit is an ideal solution for soft, medium, or hard rock formations, it is connected with the drill stem and rotates along with it, and drive cones to pressed on the rock. Each cone rotates round the axis of its leg and three cones simultaneously revolve around the bit center. The tungsten carbide inserts on the cone shell cause the formation to spall under the weight on bit and the impact load of cone rotating, the debris will be discharged out to hole by compression air. Tricone bits come in several different varieties, and can deal with a wide range of different rock formations. It is important to know the type of formation you are drilling in when selecting a drill bit.
Hard to Very-Hard Formation
Application : For use in moderately abrasive consolidated formations with compressive strength ranging between 140 – 485 Mpa such as hard limestone, quartzite, granodiorite, and medium grade metamorphic formations
Cutting structure: These bits are characterized by closely spaced conical or spherical inserts with medium to low projection. This configuration promotes good penetration rates in hard, consolidated and very abrasive formations. Smaller carbide inserts are provided on the gage and inner rows or hard metal is deposited in the nose area to contain shell erosion and improve performance.
- Compression Strength: 60,000 – 100,000 psi
- Drilling Speeds: 50 – 90 rpm
- Jet Circulation: All sizes
- Weight on Bit (WOB): 4,000 – 7,500 lbs/in of bit diamete
These bits are used to drill high-compressive strength, medium hard formations. A small amount of cone offset and low insert projection is used to prevent cutting structure damage when hard streaks are encountered. Increased numbers of blunter, smaller diameter inserts are used to increase life in harder, more abrasive formations.
|
Formation
Characteristics
|
Insert Spacing |
Insert
Properties
|
Penetration and Cuttings Production |
Cleaning Flow Rate Requirement |
| Soft |
Wide |
Long and sharp |
High |
High |
| Medium |
Relatively wide |
Shorter and stubbier |
Relatively high |
Relatively high |
| Hard |
Close |
Short and rounded |
Relatively low |
Relatively lower |
Advantage:
High quality----strictly act according to the ISO9001 standard, and all bits are manufactured according to strict standards, set forth by the American Petroleum Institute (API).
Propessional Equipment---- No matter raw material selection, or processing technology are selected is the industry leading technical equipment.
16 Years History---- From 2003 to 2019, customers are located all over the world and win a good reputation.
Product Tags:
|
|
Hard Wearing Rock Roller Bits Drilling Through Soft - Ultrahard Formations Images
|
